Features:
- This machine is used for the lasting operation of the upper's forepart, and equipped with the applicator. The rod cement of polyester or polyamide is designed for using, which ensures higher flexibility.
- Fully hydraulic operated system with the design of High-Low circuit for the operating smoothly.
- The PLC system is equipped with the touch screen to operate the machine with the graphical symbols.
- The setting of the parameters (time and stroke) are by numerical key in, with the protection of the key switch to avoid the reading or changing by the non-authorized.
- Up to 100 different shoe models are programmable and memorable with the parameters and the pincers'position, and also with the five steps quick adjustable for the width of the pincer plate.
- Error diagnostic readable on the monitor.
- The movement of the pincer plates are operated by the electric motor, and with the combine of the double point adjustment design, the left and right pincer plate can be adjusted separately.
- The first pincer can be adjusted with the 15 degrees swing angle left or right, and the actual angle will be displayed in the screen.
- The conjunction of the first pincer and the second pincer (each side) is designed with the possibility of the changeable angle up to 20 degrees.
- The automatic turning inward of the fifth pincers, increase the lasting perfection of inner part.
- Each pincer can be setting with automatic pulling or manual operated, preventing the upper made of different materials is only pulled on one side.
- After the upper clamping movement of the pincers, it is possible to operate the pincer release and clamp movement manual.
- The clamping pressure of the pincers can be set with the decompress function during the second time upward movement of the last support.
- The upward stroke of the last support can be adjusted from the knob outside the machine, and the setting value will be displayed in the screen.
- There are two step upward movement functions for the last support, preventing the slipped of the last when combined with the movement of the heel support.
- The two segment designed applicator can be used for the quick adjustable width, and also the changeable inner part for the left or right automatically.
- The position of the applicator can be quick adjusted forward or backward up to 16mm from the knob front of the machine.
- The toe pusher mechanism is designed with adjustable two step pressure. During the movement of the initial pressure, there are two ways (pressure controlled or position controlled) can be set for the best operation.
- The new designed adjustable mechanism for the downward position of the wiper plate is operated easily.
- The forward movement of the wiper can be adjusted as no stepped variable speed controlled.
- The standard equipment: Auxiliary wiper mechanism, Auxiliary side pusher mechanism and Toe projector mechanism.
Specifications:
| |
| Model |
CF-777MA |
| Pincers |
9 |
| Pump Motor |
2.2 KW |
| Max. Power Consumption |
4.5 KW |
| Oil Pressure |
50 kg/cm2 |
| Productivity |
180 pairs/hour |
| Oil Filling |
136 liters |
| Net Weight |
1400 KGS |
| Gross Weight |
(Be provided before shipment) |
| Dimension |
1950(L) 1050(W) 2000(H)mm |
| Packing Size |
2100(L) 1150(W) 2230(H)mm |
| The description and features mentioned on the catalogues are binding any change maybe made a without notice. |
|
